Please use this identifier to cite or link to this item: http://doi.org/10.25358/openscience-2727
Full metadata record
DC FieldValueLanguage
dc.contributor.authorFreisinger, Birger
dc.date.accessioned2013-06-20T13:28:19Z
dc.date.available2013-06-20T15:28:19Z
dc.date.issued2013
dc.identifier.urihttps://openscience.ub.uni-mainz.de/handle/20.500.12030/2729-
dc.description.abstractDie Herstellung von Polymer-Solarzellen aus wässriger Phase stellt eine attraktive Alternative zu der konventionellen lösemittelbasierten Formulierung dar. Die Vorteile der aus wässriger Lösung hergestellten Solarzellen liegen besonders in dem umweltschonenden Herstellungsprozess und in der Möglichkeit, druckbare optoelektronische Bauteile zu generieren. Die Prozessierbarkeit von hydrophoben Halbleitern im wässrigen Milieu wird durch die Dispergierung der Materialien, in Form von Nanopartikeln, erreicht. Der Transfer der Halbleiter in eine Dispersion erfolgt über die Lösemittelverdampfungsmethode. Die Idee der Verwendung von partikelbasierte Solarzellen wurde bereits umgesetzt, allerdings blieben eine genaue Charakterisierung der Partikel sowie ein umfassendes Verständnis des gesamten Fabrikationsvorgangs aus. Deshalb besteht das Ziel dieser Arbeit darin, einen detaillierten Einblick in den Herstellungsprozess von partikelbasierten Solarzellen zu erlangen, mögliche Schwächen aufzudecken, diese zu beseitigen, um so zukünftige Anwendungen zu verbessern. Zur Herstellung von Solarzellen aus wässrigen Dispersionen wurde Poly(3-hexylthiophen-2,5-diyl)/[6,6]-Phenyl-C61-Buttersäure-Methylester (P3HT/PCBM) als Donor/Akzeptor-System verwendet. Die Kernpunkte der Untersuchungen richteten sich zum einen die auf Partikelmorphologie und zum anderen auf die Generierung einer geeigneten Partikelschicht. Beide Parameter haben Auswirkungen auf die Solarzelleneffizienz. Die Morphologie wurde sowohl spektroskopisch über Photolumineszenz-Messungen, als auch visuell mittels Elektronenmikroskopie ermittelt. Auf diese Weise konnte die Partikelmorphologie vollständig aufgeklärt werden, wobei Parallelen zu der Struktur von lösemittelbasierten Solarzellen gefunden wurden. Zudem wurde eine Abhängigkeit der Morphologie von der Präparationstemperatur beobachtet, was eine einfache Steuerung der Partikelstruktur ermöglicht. Im Zuge der Partikelschichtausbildung wurden direkte sowie grenzflächenvermittelnde Beschichtungsmethoden herangezogen. Von diesen Techniken hatte sich aber nur die Rotationsbeschichtung als brauchbare Methode erwiesen, Partikel aus der Dispersion in einen homogenen Film zu überführen. Des Weiteren stand die Aufarbeitung der Partikelschicht durch Ethanol-Waschung und thermische Behandlung im Fokus dieser Arbeit. Beide Maßnahmen wirkten sich positiv auf die Effizienz der Solarzellen aus und trugen entscheidend zu einer Verbesserung der Zellen bei. Insgesamt liefern die gewonnen Erkenntnisse einen detaillierten Überblick über die Herausforderungen, welche bei dem Einsatz von wasserbasierten Dispersionen auftreten. Die Anforderungen partikelbasierter Solarzellen konnten offengelegt werden, dadurch gelang die Herstellung einer Solarzelle mit einer Effizienz von 0.53%. Dieses Ergebnis stellt jedoch noch nicht das Optimum dar und lässt noch Möglichkeiten für Verbesserungen offen.de_DE
dc.description.abstractAqueous processing of polymer solar cells presents an attractive alternative to the conventional solvent based fabrication of photovoltaics. The benefits of these cells are particularly the environmentally friendly fabrication process and the realization of printable devices. The processability of hydrophobic semiconductors in the aqueous phase is achieved by dispersing the materials as nanoparticles. The emulsification solvent evaporation method is used to transfer the semiconductors into an aqueous dispersion. The concept of particle-based organic solar cells has been already implemented, however, a detailed characterization of the particles and a fundamental understanding of the entire fabrication process is absent. For that reason, the aim of this thesis is to gain a detailed insight into the preparation process of particle-based solar cells in order to reveal and eradicate potential problems, improving future applications. The donor/acceptor system poly(3-hexylthiophene-2,5-diyl)/[6,6]-phenyl-C61-butyric acid methyl ester (P3HT/PCBM) is used for this approach. This study focuses on an investigation of particle morphology and the formation of suitable particle layers. Both parameters have a great impact on the device efficiency. The morphology was characterized and investigated both spectroscopically, via photoluminescence measurements, and visually, by electron microscopy. In this manner, the particle morphology was fully clarified and parallels to the structure of solution-processed photovoltaics could be found. Further, the influence of preparation temperature on the morphology was observed, allowing an easy control of the particle structure. In the course of particle layer formation, direct assembly and liquid interface-mediated processes were applied. However, only the spin coating technique has to prove practical for converting particles from a dispersion into a suitable homogeneous film. Moreover, reprocessing of the particle layer by ethanol washing and thermal treatment was also an important aspect of this work. These steps had a positive effect on the efficiency of the devices, contributing decisively to the improvement of particle-based solar cells. The obtained cognitions provided a detailed overview of the challenges arising in the use of aqueous dispersions instead of traditional solvent processing. The requirements of particle-based solar cells could therefore be revealed, in the process allowing successful fabrication of solar cells with an efficiency of 0.53%. However, this result is not the optimum, and room for improvements is still present.en_GB
dc.language.isoeng
dc.rightsInCopyrightde_DE
dc.rights.urihttps://rightsstatements.org/vocab/InC/1.0/
dc.subject.ddc540 Chemiede_DE
dc.subject.ddc540 Chemistry and allied sciencesen_GB
dc.titleInvestigation of P3HT PCBM particle-based solar cellsen_GB
dc.title.alternativeInvestigation of P3HT/PCBM particle-based solar cellsen_GB
dc.typeDissertationde_DE
dc.identifier.urnurn:nbn:de:hebis:77-34500
dc.identifier.doihttp://doi.org/10.25358/openscience-2727-
jgu.type.dinitypedoctoralThesis
jgu.type.versionOriginal worken_GB
jgu.type.resourceText
jgu.description.extent168 S.
jgu.organisation.departmentExterne Einrichtungen-
jgu.organisation.year2013
jgu.organisation.number0000-
jgu.organisation.nameJohannes Gutenberg-Universität Mainz-
jgu.rights.accessrightsopenAccess-
jgu.organisation.placeMainz-
jgu.subject.ddccode540
opus.date.accessioned2013-06-20T13:28:19Z
opus.date.modified2020-06-22T11:03:55Z
opus.date.available2013-06-20T15:28:19
opus.subject.dfgcode00-000
opus.organisation.stringExterne Einrichtungen: Max-Plank-Institut für Polymerforschungde_DE
opus.identifier.opusid3450
opus.institute.number5060
opus.metadataonlyfalse
opus.type.contenttypeDissertationde_DE
opus.type.contenttypeDissertationen_GB
jgu.organisation.rorhttps://ror.org/023b0x485
Appears in collections:JGU-Publikationen

Files in This Item:
  File Description SizeFormat
Thumbnail
3450.pdf11.85 MBAdobe PDFView/Open