Please use this identifier to cite or link to this item:
http://doi.org/10.25358/openscience-1692Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Zhang, Renhua | |
| dc.date.accessioned | 2007-12-18T10:13:38Z | |
| dc.date.available | 2007-12-18T11:13:38Z | |
| dc.date.issued | 2007 | |
| dc.identifier.uri | https://openscience.ub.uni-mainz.de/handle/20.500.12030/1694 | - |
| dc.description.abstract | Surface stress changes induced by specific adsorption of molecules were investigated using a micromechanical cantilever sensor (MCS) device. 16 MCS are grouped within four separate wells. Each well can be addressed independently by different liquid enabling functionalization of MCS separately by flowing different solutions through each well and performing sensing and reference experiments simultaneously. In addition, each well contains a fixed reference mirror, which allows measuring the absolute bending of MCS. The effect of the flow rate on the MCS bending change was found to be dependent on the absolute bending value of MCS. In addition, the signal from the reference mirror can be used to follow refractive index changes upon mixing different solutions. Finite element simulation of solution exchange in wells was compared with experiment results. Both revealed that one solution can be exchanged by another one after a total volume of 200 µl has flown through. Using MCS, the adsorption of thiolated deoxyribonucleic acid (DNA) molecules and 6-mercapto-1-hexanol (MCH) on gold surfaces, and the DNA hybridization were performed. The nanomechanical response is in agreement with data reported by Fritz et al.1 Thus, the multiwell device is readily applicable for sensing of multiple chemical and biological recognition events in a single step. In this context controlled release and uptake of drugs are currently widely discussed. As a model system, we have used polystyrene (PS) spheres with diameters in the order of µm. The swelling behavior of individual PS spheres in toluene vapor was studied via mass loading by means of micromechanical cantilever sensors. For 4–8% cross-linked PS a mass increase of 180% in saturated toluene vapor was measured. In addition, the diameter change in saturated toluene vapor was measured and the corresponding volume increase of 200% was calculated. The mass of the swollen PS sphere decreases with increasing exposure time to ultraviolet (UV) light. The swelling response is significantly different between the first and the second exposure to toluene vapor. This is attributed to the formation of a cross-linked shell at the surface of the PS spheres. Shape persistent parts were observed for locally UV irradiated PS spheres. These PS spheres were found to be fluorescent and cracks occur after exposure in toluene liquid. The diffusion time of dye molecules in PS spheres increases with increasing chemical cross-linking density. This concept of locally dissolving non cross-linked PS from the sphere was applied to fabricate donut structures on surfaces. Arrays of PS spheres were fabricated using spin coating. The donut structure was produced simply after liquid solvent rinsing. The complete cross-linking of PS spheres was found after long exposure time to UV. We found that stabilizers play a major role in the formation of the donut nanostructures. | en_GB |
| dc.description.abstract | Surface stress changes induced by specific adsorption of molecules were investigated using a micromechanical cantilever sensor (MCS) device. 16 MCS are grouped within four separate wells. Each well can be addressed independently by different liquid enabling functionalization of MCS separately by flowing different solutions through each well and performing sensing and reference experiments simultaneously. In addition, each well contains a fixed reference mirror, which allows measuring the absolute bending of MCS. The effect of the flow rate on the MCS bending change was found to be dependent on the absolute bending value of MCS. In addition, the signal from the reference mirror can be used to follow refractive index changes upon mixing different solutions. Finite element simulation of solution exchange in wells was compared with experiment results. Both revealed that one solution can be exchanged by another one after a total volume of 200 µl has flown through. Using MCS, the adsorption of thiolated deoxyribonucleic acid (DNA) molecules and 6-mercapto-1-hexanol (MCH) on gold surfaces, and the DNA hybridization were performed. The nanomechanical response is in agreement with data reported by Fritz et al.1 Thus, the multiwell device is readily applicable for sensing of multiple chemical and biological recognition events in a single step. In this context controlled release and uptake of drugs are currently widely discussed. As a model system, we have used polystyrene (PS) spheres with diameters in the order of µm. The swelling behavior of individual PS spheres in toluene vapor was studied via mass loading by means of micromechanical cantilever sensors. For 4–8% cross-linked PS a mass increase of 180% in saturated toluene vapor was measured. In addition, the diameter change in saturated toluene vapor was measured and the corresponding volume increase of 200% was calculated. The mass of the swollen PS sphere decreases with increasing exposure time to ultraviolet (UV) light. The swelling response is significantly different between the first and the second exposure to toluene vapor. This is attributed to the formation of a cross-linked shell at the surface of the PS spheres. Shape persistent parts were observed for locally UV irradiated PS spheres. These PS spheres were found to be fluorescent and cracks occur after exposure in toluene liquid. The diffusion time of dye molecules in PS spheres increases with increasing chemical cross-linking density. This concept of locally dissolving non cross-linked PS from the sphere was applied to fabricate donut structures on surfaces. Arrays of PS spheres were fabricated using spin coating. The donut structure was produced simply after liquid solvent rinsing. The complete cross-linking of PS spheres was found after long exposure time to UV. We found that stabilizers play a major role in the formation of the donut nanostructures. | en_GB |
| dc.language.iso | eng | |
| dc.rights | InCopyright | de_DE |
| dc.rights.uri | https://rightsstatements.org/vocab/InC/1.0/ | |
| dc.subject.ddc | 540 Chemie | de_DE |
| dc.subject.ddc | 540 Chemistry and allied sciences | en_GB |
| dc.title | Polymer properties measured by micromechanical cantilever technique | en_GB |
| dc.type | Dissertation | de_DE |
| dc.identifier.urn | urn:nbn:de:hebis:77-14692 | |
| dc.identifier.doi | http://doi.org/10.25358/openscience-1692 | - |
| jgu.type.dinitype | doctoralThesis | |
| jgu.type.version | Original work | en_GB |
| jgu.type.resource | Text | |
| jgu.organisation.department | FB 09 Chemie, Pharmazie u. Geowissensch. | - |
| jgu.organisation.year | 2007 | |
| jgu.organisation.number | 7950 | - |
| jgu.organisation.name | Johannes Gutenberg-Universität Mainz | - |
| jgu.rights.accessrights | openAccess | - |
| jgu.organisation.place | Mainz | - |
| jgu.subject.ddccode | 540 | |
| opus.date.accessioned | 2007-12-18T10:13:38Z | |
| opus.date.modified | 2007-12-18T10:13:38Z | |
| opus.date.available | 2007-12-18T11:13:38 | |
| opus.subject.other | Swelling, polystyrene, cantilever sensor, DNA | en_GB |
| opus.organisation.string | FB 09: Chemie, Pharmazie und Geowissenschaften: FB 09: Chemie, Pharmazie und Geowissenschaften | de_DE |
| opus.identifier.opusid | 1469 | |
| opus.institute.number | 0900 | |
| opus.metadataonly | false | |
| opus.type.contenttype | Dissertation | de_DE |
| opus.type.contenttype | Dissertation | en_GB |
| jgu.organisation.ror | https://ror.org/023b0x485 | |
| Appears in collections: | JGU-Publikationen | |
